|
|
| Product |
| |
| Aluminium & other Filler Wire |
| |
| |
|
| |
| |
|
| |
| |
| |
| Aluminium & Aluminium Alloys Welding Wires |
| Chemical Composition |
Wire Grade as per AWS 5.10. |
"SWASTIK
WELD" ER 1100 |
"SWASTIK
WELD" ER 4043 |
"SWASTIK WELD" ER 4047 |
"SWASTIK WELD" ER 5183 |
"SWASTIK WELD" ER 5356 |
Mn |
0.05max |
0.03max |
0.15max |
0.50-1.00 |
0.05-0.10 |
Si |
0.025max |
4.5-6.0 |
11.0-13.0 |
0.40max |
0.25max |
Cu |
0.05-0.20 |
0.30max |
0.30max |
0.10max |
0.10max |
Cr |
- |
- |
- |
0.05-0.25 |
0.05-0.20 |
Mg |
- |
0.05max |
0.10max |
4.3-5.2 |
4.5-5.5 |
Zn |
0.10max |
0.10max |
0.20max |
0.025max |
0.10max |
Fe |
0.4max |
0.80max |
0.80max |
0.40max |
0.40max |
Al |
99.0min |
Remainder |
Remainder |
Remainder |
Remainder |
Ti |
- |
0.20max |
- |
0.15max |
0.06-0.20 |
Others |
0.15max |
0.15max |
0.15max |
0.15max |
0.15max |
|
| |
Applications |
| Swastik Weld ER 1100 |
Rivets, Food Handling Equip., Metallizing, Heat Exchanger. |
| Swastik Weld ER 4043 |
Recommended for Welding 3003, 3004, 5052, 6061, 6063 & Casting Alloy 43, 355, 356 & 214. |
| Swastik Weld ER 4047 |
It has higher Silicon content than ER 4043 and is recommended for higher fluidity, good finish and high Strength. |
| Swastik Weld ER 5183 |
Recommended for welding of high alloys and high strength Aluminium alloys. |
| Swastik Weld ER 5356 |
Welding of grade 5xxx alloys of high strength. |
|
| |
| Diameters (mm) : |
| In Mig spools of size: 0.80mm, 1.00mm ,1.20mm & 1.60mm |
| In Tig form of sizes: 1.60mm, 2.40mm, 3.15mm, 4.00mm (1000mm length) |
| |
Standard Packing |
| Mig Packing in 7 kgs Spool. |
| Tig Packing in 5 kgs Plastic Tube. |
| |
|
|
| |
| |
| |
| Aluminium & Aluminium Alloys Welding Wires Swastik Weld - 4043 |
5% Silicon Aluminum Welding Rods
Bright Finish |
| |
| AWS A5.10 Class ER4043 |
| Description |
5% Silicon bare aluminum welding rods, flows freely at 1155 °F (623 °C) and can be used with the gas or gas tungsten-arc welding processes. |
| |
| Application |
| Recommended for welding 3003, 3004, 5052, 6061, 6063, and casting alloys 43, 355, 356 and 214. |
| |
| Typical Composition |
| Si 4.5-6.0%; Cu 0.30 Max.; Fe 0.80 Max.; Mn 0.05 Max.; Zn 0.10 Max.; Mg 0.05 Max.; Ti 0.20 Max.; Others 0.15 Max.; Al Balance (95%). |
| |
| Diameters (mm) |
1) In Mig spools of size: 0.80mm, 1.00mm, 1.20mm & 1.60mm
2) In Tig Form of sizes: 1.60mm, 2.40mm, 3.15mm, 4.00mm (1000 length) |
| |
| Standard Packing |
1) Mig Packing in 7 kgs spool
2) Tig Packing in 5 kgs Plastic Tube |
| |
|
|
| |
| |
| |
| Aluminium & Aluminium Alloys Welding Wires Swastik Weld - 5356 |
5% Magnesium Welding Rods
Bright Finish |
| |
| AWS A5.10 Class ER5356 |
| Description |
5% Mg bare aluminum welding rods, flows freely at 1180 °F (637 °C) and can be used with the gas or gas tungsten-arc welding processes. |
| |
| Application |
| Recommended for joining 5050. 5052. 5083, 5086, 5356, 5454, and 5456. |
| |
| Typical Composition |
| Mg 4.5-5.5%; Si 0.25 Max.: Fe 0.40 Max.; Cu 0.10 Max.; Mn 0.10 Max.; Zn 0.10 Max.; Cr 0.05-0.20%; Ti 0.06-0.20%; Others 0. 15 Max.; Al Balance (94%) |
| |
| Diameters (mm) |
1) In Mig spools of size: 0.80mm, 1.00mm, 1.20mm & 1.60mm
2) In Tig Form of sizes: 1.60mm, 2.40mm, 3.15mm, 4.00mm (1000 length) |
| |
| Standard Packing |
1) Mig Packing in 7 kgs spool
2) Tig Packing in 5 kgs Plastic Tube |
| |
|
|
| |
| |
|
|
|
