| Product |
| |
| NDT Testing & Mpc Testing Materials >> Pradeep Make |
|
| |
Dye Penetrant Testing Products a complete solution...
We offer a complete line of Dye Penetrant Testing Consumables and Accessories for Non Destructive Testing. All these products are highly reliable and meet the requirements of most of the international specifications such as ASME Sec V, ASTM, IS, BS, MIL, Navesa, NPCIL specifications for Liquid Penetrant Inspection. |
|
|
| |
|
| |
| |
Dye Penetrant Testing is one of the Non Destructive Method of Testing. It is used for detection of defects which are open to the surface. The Method is quite simple & is used in many industries such as Heavy Engineering, Automotive, Shipping, Nuclear Power, Thermal Power, Wind Power, Petrochemical, Aerospace, Boiler, Heat Exchanger, Manufacturers, Railways etc.
We offer a complete range of Dye Penetrant Testing Consumables for Non Destructive Testing. All these products are highly reliable and meet the requirements of most of the international specifications such as ASME Sec V, ASTM, IS, BS, MIL, Navesa, NPCIL, RDSO Specifications for Liquid Penetrant Inspection. |
|
|
Selection Chart
Flaw Guide Penetrants available in: Packing of 1 & 5 Ltr. Container and 425 ml. Aerosol Can |
| |
Item |
Color |
Type |
Sensitivity |
Red Dye Penetrant GP |
Red in Day Light |
Solvent Clean |
1x20 µ |
Red Dye Penetrant NP |
Red in Day Light |
Solvent Clean |
2x50 µ |
Red Dye Penetrant W |
Red in Day Light |
Water Washable |
1x20 µ |
Red Dye Penetrant SP |
Red in Day Light |
Solvent Clean/Water Washable |
1x30 µ |
Dye Penetrant Fluo GP
Dye Penetrant Fluo W |
Bright Yellow Green Under UV Light
Bright Yellow Green Under UV Light |
Solvent Clean
Water Washable |
0.5x10 µ
0.5x10 µ |
Dye Penetrant DM
(Dual Mode Dual Purpose) |
Red Under day light & Bright Orange Under UV Light |
Water Washable as well as Type |
1x20 µ
in daylight &
0.5x10 µ in UV Light |
|
| |
| |
Flaw Guide Developers
Packing: 1 & 5 ltr container and 425 ml Aerosol Can |
Flaw Guide Cleaners
Packing : 1 &5 ltr container and 425 ml Aerosol Can
|
Developer GP: Non Aqueous Developer Based on Non Halogenated, Flammable Solvent for all application.
|
Cleaner GP: Non Aqueous Penetrant Remover/Cleaner based on non Halogenated, Flammable solvents
|
Developer NP: Non Aqueous Developer Based on Non Halogenated, Flammable Solvent Specially For Nuclear applications.Approved by NPCIL,
|
Cleaner NP: Non Aqueous Penetrant Remover based on non Halogenated, Flammable solvents for Nuclear applications. Approved by NPCIL
|
Developer SP: Non Aqueous Developer Based on Non Halogenated, Flammable Solvent Special Application.
|
Cleaner SP: Non Aqueous Penetrant Remover based on non Halogenated, Flammable solvents for Special applications.
|
Developer P: Dry Developer Powder For Dry application By Spraying or dipping
|
Cleaner HD-125: This Is Neutral Liquid for removal of Oil & Grease. It is to be diluted with water
|
|
| |
Flaw Guide Leak Testing Products |
| |
|
| |
Selection Chart
Colorimetric Developer 290: It helps to locate the exact position of leak by color change when comes in contact with water or any other polar liquid & gases. Excellent contrast is provided within the products which makes it suitable to use on any surface. Being non reactive, this product can be used on all metals, glass, ceramics & plastics.
3 in 1 Leak Detector DLC: It helps to locate exact position of leak by color change. It also locates surface flaws as in case of visible as well as fluorescent Penetrant testing thus carrying 3 tests in one operation. Product is neutral to any metal, glass, ceramics and plastics.
Leak Detector BBL: This Solvent when applied helps to detect minute leakage of gases by Bubble Technique. It is widely used for all types of tank and piping systems. Unlike ordinary soap liquids, this product is non ionic and neutral. Hence does not affect any of the metal and plastic. Extremely low halogen & sulphur makes the product suitable for special alloy steels containing Nickel, Titanium etc.
Leak Detector Fluo: It is highly suitable for very large size cooling water tanks. It is supplied as fine powder and is added in extremely small proportion to water in cooling tanks (approx 1to 2 gm per 1000 litres of water). Hence it is very economical, reliable & suitable to test large tanks of very high capacities. It also detects micro leaks by showing bright fluorescence at the location of leak when subjected to UV (Black) Light. |
| |
Magnetic Particle Testing Products
Magnetic Particle Testing is one of the Non Destructive Method of testing ferromagnetic components for the detection of surface & subsurface cracks, grinding cracks, heat treatment cracks, stringer type non metallic inclusions, porosities, laps & folds. This method can be applied to finished articles, billets, hot rolled bars, casting & forging, pipelines, bars & rods, crank shafts, wheels, pins, fabrication & maintenance, shipping, railways, automotive, power generating industries etc.
We offer a complete range of Magnetic Particle Testing Consumables for Non Destructive Testing. All these products are highly reliable and meet the requirements of most of the international specifications such as ASME Sec V, Article 7, ASTM E-709/1444, IS -6410, BS-4069/6072/& RDSO Specification for Magnetic Particle Inspection. |
|
|
| |
|
| Non Fluorescent Magnetic Powders |
Item |
Method |
Colour |
Application |
Particle Size |
Carrier Liquid |
Sesitivity Ketoes Ring |
Automag BD-1 |
Dry |
Black |
Day Light |
100 µ |
- |
7-Jun |
Automag RD-7 |
Dry |
Red |
Day Light |
100 µ |
- |
7-Jun |
Automag GD-8 |
Dry |
Gray |
Day Light |
100 µ |
- |
7-Jun |
Automag BO-23 |
Wet |
Black |
Day Light |
5-20 µ |
Petroleum Oil |
6 |
Automag RO-26 |
Wet |
Red |
Day Light |
5-20 µ |
Petroleum Oil |
6 |
Automag BW-245 |
Wet |
Black |
Day Light |
5-20 µ |
Water |
6 |
Automag RW-246 |
Wet |
Red |
Day Light |
5-20 µ |
Water |
6 |
|
| |
Fluorescent Magnetic Powders |
Item |
Method |
Colour |
Application |
Particle Size |
Carrier Liquid |
Sesitivity Ketoes Ring |
Automag Fluo-22 |
Dry |
Bright Green |
UV Light |
120 µ |
- |
7-Jun |
Green Dust 88K |
Wet |
Bright Green |
UV Light |
5 To 8 µ |
Petroleum Oil |
9-Aug |
Green Dust 88W |
Wet |
Bright Green |
UV Light |
5 To 8 µ |
Water |
9-Aug |
Green Dust 88WG |
Wet |
Bright Green |
UV Light |
5 To 8 µ |
Water |
9-Aug |
|
| |
Magnetic Ink Concentrates & Ready to Use |
Item |
Method |
Colour |
Application |
Particle Size |
Carrier Liquid |
Sesitivity Ketoes Ring |
Magna Ink BW |
Wet |
Black |
Day Light |
5 To 8 µ |
Water |
7-Jun |
Magne Ink RW |
Wet |
Red |
Day Light |
5 To 8 µ |
Water |
7-Jun |
Magne Ink GYW |
Wet |
Bright G. Yellow |
UV Light |
5 To 8 µ |
Water |
8-Jul |
|
| |
Aerosol Products Packing :550ml Aerosal Can 425ml net content |
White Contrast: It is Quick Drying Non –Fluorescent White coat. The Coating Thickness 10 microns in single application. Easy to remove after use- Uniform Coating for better contrast- supplied in Aerosol Cans.
Magna Ink BK: Ready to Use Black Magnetic Ink in Aerosol Spray. The particle size is less than 5 micron. The sensitivity is minimum 7 on Ketoes Ring.
Magna Ink GYK: Ready to Use Bright Golden Yellow Fluorescent Magnetic Ink in Aerosol Spray. The particle size is less than 5 micron. The sensitivity is minimum 7 on Ketoes Ring.
Magna Ink RK : Ready to use Red Magnetic Ink in Aerosol spray. The particle size is less than 5 micron. The sensitivity is minimum 7on Ketoes Ring. |
| |
Other Products |
Carrier Liquid GP: Petroleum oil base carrier liquid with Min. flash point 52°C. It is suitable for wet Magnetic Particle Testing. It is odorless and operator friendly.
Carrier Liquid SP: Petroleum oil base carrier liquid with 92°C flash point. It is suitable for wet Magnetic Particle Testing. It is Odorless and operator friendly.
Water Conditioner (WA-29): Supplied as powder and contains wetting, anti-foaming, anti corrosive and water softeners pre blended. Recommended 10gms per litre of water when used with Green Dust 88K to make it suitable for suspension in water. |
| |
| Product Data sheet |
| Flaw Guide Red Dye Penetrant Chemicals |
| |
Products → |
Penetrant |
Developer |
Cleaner |
Tests Grades→ |
GP |
NP |
W |
GP/NP |
GP/NP |
↓ |
|
|
|
|
|
Appearance |
Dark Red Oily Liquid |
Bright White Suspension |
Colourless Liquid |
Odour |
------------------------Operator Friendly (Non objectionable)------------------- |
Sp.Gravity |
0.87 +2% |
0.87 + 2% |
0.89 + 2% |
|
|
Viscocity |
3 to 6 cst |
3 to 6 cst |
3 to 6 cst |
N.A |
N.A |
Surface Tension (Dynes/cm) |
35 + 2 |
35 + 2 |
35 + 2 |
N.A |
N.A |
Suspension |
N.A |
N.A |
N.A |
Very Good |
N.A |
Characteristics |
|
Film Uniformity |
------- Thin & Uniform -------- |
Thin & Uniform |
Not Applicable |
Flash Point |
--------More Than 52° C------- |
Less Than 15 C |
Less Than 15 C |
Sulphur Content |
Less than 0.01%Less than 0.01% Less than 0.01% |
Less than 0.01% |
Less than 0.01% |
Halogen Content |
Less than 0.01%Less than 0.01% Less than 0.01% |
Less than 0.01% |
Less than 0.01% |
Hydrolysable Halogen
(For NP-Grade) |
N.A |
Lessthan 25ppm Less than 25ppm |
Less than 25 ppm |
Less than 25 ppm |
Drying Characteristic
(at ambient Temp.) |
------------ Non Drying --------- |
1 Min. (Approx) |
1 Min. (Approx) |
Toxicity |
--------------Non Toxic---------- |
Non Toxic |
Non Toxic |
Corrosiveness |
--------- Non Corrosive---------- |
Non Corrosive |
Non Corrosive |
Area Coverage |
|
|
|
*280 Ml. Aerosol Can |
----------- Not applicable-------- |
3.0 Sq.M. |
N.A. |
*425 Ml. Aerosal Can |
--------- Not applicable---------- |
4.5 Sq.M. |
N.A. |
* Meniscus Test |
---------- 2..5 mm dia ----------- |
N.A. |
N.A. |
Performance test |
|
*Ni-Cr Sensitivity Pane |
--------------- Reveal 1 u x 20 u cracks-----------------
|
*Al.Quench Crack Pane |
-------------------Reveal all the Cracks------------------ |
*Prett & Whitney Panel |
-----------------Reveal 3 Stars Clearly------------------ |
|
|
|
|
|
|
|
| |
Meet The requirements of international specifications for Dye Penetrant testing such as ASME (B & PV) Sec V / ASTM E- 165 / IS-3658 & 12889 / MIL-I-25135 / NAVSEA 250-1500-I / Grade NP is approved by NPC Of India
Propellent Used in aerosol ------------------------ Hydrocarbon (Ozone Friendly)-----------------------
Packings :
1 Aerosol packing : 280 ml. / 425 ml. Tin Cans
2. Loose 1 Ltr./ 5 Ltr./ 20 Ltr. Tin or PVC
Note : Flash point mentioned above is for base material. Flashpoint condition is not applicable to aerosol cans since propellent is hydrocarbon.If required by the customer, material of flash point upto 95ºC can be supplied without alteration in other properties.
|
| |
| |
